In a case of an asbestos emergency. Several guidelines can be used to prevent further exposure of asbestos dust and keep the exposure level at the lowest. A natural disaster like storm in a workplace, especially when it includes an asbestos containing material on the scene, needs a fast a quick response of emergency repair. So, what should you do in a case of emergency?
- Stop all activities and work
When a natural disaster happens, keep in mind to stop all activities immediately in the building as a natural disaster such as storm may release asbestos dust and fibres into the air.
- Restrict access to the area
Restrict the access to the suspected asbestos contaminated area. This can be done by locking every doorway entry and put a warning sign in areas to prevent people and workers entering the area and risking themselves to asbestos fibres. Also, do not forget to turn off any air conditioner system to prevent exposure to other area.
- Notify and inform the site authorities
Never try or even touch anything within the contaminated site. Contact the site authorities, as an example, the site manager or the security staff and tell them about the situation ASAP.
- Spread the information around the area
People in the workplace need to be notified about the situation as well. Those who are responsible for daily maintenance of the building, especially related to asbestos materials, should be the priority as the people to tell about the situation. The more people know about the situation, the more people will be able to prevent other people from entering the contaminated site and risking their lives to asbestos exposure.
- Inform an asbestos consultant
This step is important to do a risk assessment or create a management plan as soon as possible.
- Site visits
The asbestos consultant will then visit the polluted area to test on the suspected substance. Sample collecting may also be performed if needed. After the sample obtained has a favorable outcome, notify the asbestos material control planner and continue on the second step (stage 7). The sample result is unfavorable, notify the asbestos material management planner, and continue to stage 9.
- Speak to a licensed asbestos contractor for asbestos removal Perth
The coordinator of asbestos material management takes in a certified contractor to do the cleanup. Asbestos removal Perth is conducted in accompany with the asbestos consultant.
- Air monitoring
This procedure is done in the contaminated area to be certain of the degree of the dust that is still acceptable dependent on the exposure level. A physical inspection is also conducted after the removal process, to confirm that the removal has reached a standard procedure. The step is taken to guarantee the protection of unprotected workers who enter the area.
All staff that handles the decontamination process arranges a meeting to assess the asbestos management program.
- Updating the asbestos register
Any changes on asbestos containing materials in the region ought to be placed into the asbestos register. As part of sharing the understanding of safety gear and procedures which needs to be conducted, it would be wise that not only a professional can comprehend the steps of emergency procedures. However, it’s highly suggested to use an experienced and licensed professional to do the job. In case that you live or work within a property which you merely know may consist of asbestos-containing material (ACM), it’s recommended you invest in an ‘Asbestos Emergency Personal Protection Kit.’
- P2 face mask
- Full body suit
- Boot covers
- Latex gloves
- Leather gloves – large sufficient to fit over latex gloves
You also will need to have:
- Plastic spray bottle
- Duct tape x 4 rolls
- A roll of heavy duty builder’s plastic
If you accidentally break ACMs, like interior or exterior flat sheet, asbestos containing sheet (ACS), or asbestos containing corrugated sheet (ACCS), probably an essential factor would be to cut the spread of asbestos fibers/dust.
It’s the Foundation’s belief you need simply to deal with the ACM in an emergency circumstance, to create small quantities of broken ACM secure.
Before commencing, you want to fit and put on your ‘Emergency Asbestos Personal Protective Kit’:
- Instantly wet down the impacted broken region and wipe any dust or visible residue off with wet mop, place the wet mop in a heavy-duty garbage bag and double the bag.
- Seal any exposed broken edges of the ACM with paint, PVC glue or silicon kind sealant – this will ensure the asbestos fibers will not leach out from the ACM.
- Double wrap any broken pieces of ACM in heavy plastic sheeting and disposal of at your nearest authorized ‘asbestos’ disposal facility – Do not BIN – or else get in contact with a licensed asbestos removalist.
- Never use a power tool or vacuum cleaner to clean up or work on ACMs.
Even better, please try to read about things to do and things that must not do with asbestos. A better understanding of how to work around asbestos can maintain a low level or possibly a zero level of exposure from the deadly fibers.